Used Drilling Rigs

1961 FRANKS 210 DRILLING RIG #9327T

• Manufacturer: Franks

Built 1961, mounted on 1982 International truck with 466 Industrial, PTO, Gardner Denver 6 x 9 mud pump, Mission centrifugal pump, air compressor, 23’ kelly, large rotary table, 2 winches, 3800’ depth, 300’ of 2-...

2006 FOREMOST DR24 DRILL RIG #6841T

Model DR12/26P-60/24-1070, Built 2006, 1070/350 Ingersoll Rand air compressor, mounted on 2006 Kenworth T800 (wide nose) triaxle truck, Cummins engine, 26’ top drive stroke, 20’ lower drive stroke, powerturn/exte...

MAIT MR5050 DRILL RIG #10084Tb

• Manufacturer: Mait

48” diameter x 50’ depth, 50,000 ft/lbs torque Price: $325,000

1972 GARDNER DENVER 1000 DRILL RIG #9790Ta

• Manufacturer: Gardner Denver

Manufactured 1972, 550/150 air compressor, 4 x 3 Mission centrifugal mud pump, mounted on tandem axle Ford truck, 700’ of 3” Bottleneck x 20’ (2-3/8 IF) drill pipe, 6” collar, (2) 7-7/8” tricone bits, starter sub...

1956 BUCYRUS ERIE 22W SERIES II CABLE TOOL DRILL RIG #6416T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.19 m

Manufactured 1956, well maintained in running condition, needs new cable, gas deck engine, drill line, sandline, mounted on 1998 Ford F700 dually 4WD truck with gas engine, hydraulic push cylinder for mast, bits,...

2006 SCHRAMM TXD200 DRILL RIG #3615T

• Manufacturer: Schramm

Manufactured 2006. Inventory includes: 2 containers of spares, Kaeser ASD37 aux air supply container, transfer pump and supply manifoled 30,000 litre bunded tank, 600mm high full length sub base, (2) White Star W...

1987 FAILING F10 DRILL RIG #10684T

• Model: F10

Auger drilling, high speed rock coring, conventional mud/air rotary drilling. Rig manufactured 1987, mounted on 2015 Mack Truck CXU613 with 13L diesel engine, approx 540,000 miles, Eaton 10 speed manual transmiss...

1986 MOBILE B-80 DRILL RIG #3387T

Manufactured 1986, rig has a floating spindle installed for coring, et up for augering and large diameter core drilling, 22’ stroke, in/out slide base, breakout wrench, aux and main winches, no Moyno pump, no wat...

1983 SPEEDSTAR SS1000 DRILL RIG #3669T

Manufactured 1983, Gardner Denver 5 x 6 mud pump, retractable table, mounted on International 4900 tandem axle truck with 251,000 miles, 4 jacks Price: $70,000 NATIONAL DRAWWORKS SINGLE DRUM ROTARY DRILL RIG

1970 MAYHEW 1000 DRILL RIG #4003T

Manufactured 1970’s, 5 x 6 mud pump with rebuild fluid end, drawworks rebuilt, new DSM rotary, new 23’ fluted kelly and bushings, no pulldowns, some new bearings, U joints etc., mounted on 1996 Kenworth W900B tru...

MAYHEW DSM 1000 DRILL RIG #5483T

• Manufacturer: MAYHEW

Completely refurbished 2010, derrick needs a little work, Mission Magnum Sandmaster 4 x 3 x 13 mud rotary pump, mounted on 1998 Mack CH613, completely with 2-3/8 pipe and various bits Price: $167,500

INGERSOLL RAND TH60 DRILL RIG #13113T

• Manufacturer: Ingersoll Rand
• Model: TH-60

Completely refurbished 2007, 2 deck engines: Cat 3306B direct drive to 750/250 IR air compressor, John Deere 6068T (175 hp) running hydraulics (Rex Roth aned C.I.H. pressure compensated), High pressure triplex wa...

2015 TEXOMA 800-95 DRILL RIG #921T

• Manufacturer: Texoma
• Model: 800
• Horsepower: 140 hp
• Transmission type: PowerShift

Manufactured 2015, mounted on 2016 Freightliner tri-drive, 16,020# front axle, 57,160# rear axle, 73,180 GVW Price: $450,000 TEXOMA 800 DRILL RIG (3961Tc) 85’ depth, manufactured 1998, Cummins engine, 4” dry trip...

1980 FAILING CF15 DRILL RIG #3525Ta

• Manufacturer: Failing
• Model: CF15
• Horsepower: 170 hp
• Drilling depth: 450 m

Manufactured 1980, 5-1/2 x 8” Gardner Denver duplex pump, 23’ kelly, chain pulldown, air clutches, breakout wrench, 5-5/8” retractable rotary table, derrick 34’ from table to crown, mounted on 2005 Kenworth T300,...

INGERSOLL RAND TH100 DRILL RIG PACKAGE #4218T

• Manufacturer: Ingersoll Rand
• Model: TH-100

) Ingersoll Rand TH100 drill rig, 2000’ depth rating, Range III, Cat C15 (475 hp) engine, 60,000 lb pullback, 2 motor spur gear top head, 16” table opening, KB to ground 14.8’ with sub and 4.1’ no sub, 39’ max ca...

Atlas-Copco SMARTROC T45-10 Drilling Rig

• Manufacturer: Atlas-Copco
• Model: SMARTROC T45-10

Good condition Atlas-Copco SMARTROC T45-10 Drilling Rigs manufactured in 2017. Located in USA and other countries. Click request price for more information.