Used Drilling Rigs

WALKER NEER 250-40 DRILL RIG PACKAGE #1042Ta

• Manufacturer: Walker

Top head Drive drill rig, Cat 3406 (500 hp), Alliston 750 transmission, capable of running casing up to 43’, pipe handling boom, hydraulic pipe tongs, pulldown equipped (pulldown chains have been removed), rated ...

1986 INGERSOLL RAND TH60 DRILL RIG #5335T

• Manufacturer: Ingersoll Rand
• Model: TH-60

Manufactured 1986, 750/350 air compressor, rebuilt gear box, mounted on 1986 GMC General, Detroit 8V92 engine, 13 speed Eaton transmission, 400’ of 3-1/2” drill pipe, tooled. Includes a 5 x 6 Worthington mud pump...

INGERSOLL RAND RO-300 DRILL RIGS #1555Ta

• Manufacturer: Ingersoll Rand
• Model: RO-300

Detroit V8 engine, 11 speed transmission, 5 x 10 Gaso hydraulic mud pump, 42’ mast, 8-1/2” retractable table, 4-1/2” x 25’ fluted round kelly, hydraulic drive winch, mounted on 1980 International, 4 hyd jacks Pri...

1964 FAILING CFD2 DRILL RIG #8107T

• Manufacturer: Failing
• Model: CFD2

Built 1964, 4-1/2 x 5 Failing mud pump, Grimmer Schmidt 125cfm developmental air compressor, 5-1/4” stationary table, 2-3/8” kelly, 10' stroke, mounted on 1984 International truck with DT466 engine, PTO), 4 hydra...

1987 FAILING F10 DRILL RIG #10684T

• Manufacturer: Failing
• Model: F10

Auger drilling, high speed rock coring, conventional mud/air rotary drilling. Rig manufactured 1987, mounted on 2015 Mack Truck CXU613 with 13L diesel engine, approx 540,000 miles, Eaton 10 speed manual transmiss...

1986 MOBILE B-80 DRILL RIG #3387T

Manufactured 1986, rig has a floating spindle installed for coring, et up for augering and large diameter core drilling, 22’ stroke, in/out slide base, breakout wrench, aux and main winches, no Moyno pump, no wat...

1968 GARDNER DENVER 500 DRILL RIG #10015Ta

• Manufacturer: Gardner Denver

Manufactured 1968, (2) 5 x 6 mud pump, 600 cfm air compressor, 7-1/2” retractable table (rebuilt), 24’ fluted kelly, mounted on 1995 Ford L9000 truck with M11 Cummins engine, 10 speed transmission, PTO, 4 hyd lev...

1983 SPEEDSTAR SS1000 DRILL RIG #3669T

Manufactured 1983, Gardner Denver 5 x 6 mud pump, retractable table, mounted on International 4900 tandem axle truck with 251,000 miles, 4 jacks Price: $70,000 NATIONAL DRAWWORKS SINGLE DRUM ROTARY DRILL RIG

1990 DIEDRICH D50 DRILL RIG #3452Tb

• Manufacturer: Diedrich

Manufactured 1990’s, auto hammer, 3 winches, 6 cylinder John Deere diesel engine, mounted on 2013 Hino 268 truck, automatic, approx. 200k miles, used for hollow stem auger and mud rotary wells Price: $62,500

1994 TEXOMA 330-12 DRILL RIG #3961Ta

• Manufacturer: Texoma
• Model: 330
• Drilling depth: 7.62 m
• Drill Pipe Diameter: 76.2 mm

Manufactured 1994, 12’ depth, Detroit engine, (1) wet bar kelly, 3” square sub, ring and pinion rotary, 3” kelly bar, 5500 lb winch, hydraulic pole grabber that extends 6’, good condition Price: $65,000

1999 INGERSOLL RAND T3 DRILL RIG #11116Tb

• Manufacturer: Ingersoll Rand

Manufactured 1999, 900/350 Doosan air compressor (new 2022), Cat 3406 deck engine (rebuilt May 2022), approx 950 hours on compressor and engine), rotation head completely rebuilt 2024 as well as most hydraulic pu...

2015 TEXOMA 800-95 DRILL RIG #921T

• Manufacturer: Texoma
• Model: 800
• Horsepower: 140 hp
• Transmission type: PowerShift

Manufactured 2015, mounted on 2016 Freightliner tri-drive, 16,020# front axle, 57,160# rear axle, 73,180 GVW Price: $450,000 TEXOMA 800 DRILL RIG (3961Tc) 85’ depth, manufactured 1998, Cummins engine, 4” dry trip...

2004 INGERSOLL RAND TH60 DRILL RIG #11116Ta

• Manufacturer: Ingersoll Rand
• Model: TH-60

Manufactured 2004, 1070/350 IR air compressor (new 2021), Cummins engine (rebuilt 2021), new transfer case 2022, mounted on International Paystar tri-drive, set up for 3-1/2” drill rods, located Canada Price: $49...

Atlas-Copco ROC D7-11 Drilling Rig

• Manufacturer: Atlas-Copco
• Model: ROC D7-11

Good condition Atlas-Copco ROC D7-11 Drilling Rigs manufactured in 2010. Located in USA and other countries. Click request price for more information.