Processing » Extruders

Search By Manufacturer

Search By Country

Building Filters

9972

Used Extruders

  • Trusted Seller
    Randcastle RCP0750

    Randcastle RCP0750

    • Manufacturer: Randcastle

    Used Randcastle Laboratory Sheet Extrusion Line Consisting of the Following Items: – .75" Randcastle 24/1 L/D extruder with temperature control panel, Model RCP0750, Serial #J2271. – 2" O.D. x 8" wide chill roll ...

    Red Bank, NJ
  • Trusted Seller
    Killion KL-150

    Killion KL-150

    • Manufacturer: Killion

    Used 1.5” 24:1 L/D Single-Screw Extruder. Manufactured by Killion. Model KL-150. Includes: (3) control panels, Zenith melt pump with 2 hp motor. Model PEP-10 rated at 3.4-68 lbs/hr spare grooved feed throat, an...

    Red Bank, NJ
  • Trusted Seller
    EDI HRC100FC

    EDI HRC100FC

    • Manufacturer: EDI

    Used 65" Wide EDI Sheet Die, HRC100FC. Has restrictor bar. S/N 00-21321-1. Re-Work number 00-21321-1 RB.

    Red Bank, NJ
  • Trusted Seller
    EDI RC-100 F/G

    EDI RC-100 F/G

    • Manufacturer: EDI

    Used 39" Wide EDI Ultraflex RC-100 F/G Sheet Die. 0.210 Max Lip Opening. Restrictor bar. Serial # 00-21362.

    Red Bank, NJ
  • Trusted Seller
    LCI ES 90/90

    LCI ES 90/90

    • Manufacturer: LCI

    Used LCI ES 90/90 Melt Pump, 40 HP AC Motor. Serial # 1985, New In 1998. Includes second ES 90/90 Gear Pump Serial #1986. 60" Centerline. 40 HP Marathon Blue Max motor, 1770 RPM, 230/460. Does not include contr...

    Red Bank, NJ
  • Trusted Seller
    Extrusion Dies Inc. (EDI) 52

    Extrusion Dies Inc. (EDI) 52 U/F R75

    • Manufacturer: EDI
    • Model: 52 UF R75

    Unused 52" EDI dual entry sheet die. Model 52 U/F R75, serial #08-27852, new 2008. Equipped with restrictor bar and poly side control.

    Red Bank, NJ
  • Trusted Seller
    2000 Davis-Standard/Sterling Extruder with Gear

    2000 Davis-Standard/Sterling Extruder with Gear Boxes

    • Manufacturer: Davis-Standard

    2000 Davis-Standard/Sterling Extruder with Gear Boxes (2) available Screw diameter- 6” L:D ratio- 28:1 Includes heater bands Motor not included Gear box gear ratio- 24.29 Gear box model number- 60IN60 Condition- ...

    Harvey, LA
  • Trusted Seller
    Processing Technologies International LLC G3500

    Processing Technologies International LLC G3500

    • Manufacturer: International

    Used 3.5"Dia Single Screw Extruder. Made by Processing Technologies International LLC. Model G3500. Trident Series. L/D ratio 32:1. Gear Drive: PTI Model ZPE2-225-B B7. Serial #L43058. Ratio 12.59:1. Driver:1800...

    Red Bank, NJ
  • Trusted Seller
    Processing Technologies International LLC G5000

    Processing Technologies International LLC G5000

    • Manufacturer: International

    Used 5" Dia Single Screw Extruder. Built by Processing Technologies International LLC. Model G5000. Trident series. L/D ratio 32:1. Gear Drive: PTI Model ZPE2-300-B B7. Serial #15253. Ratio 12.66:1. Driver:1800. ...

    Red Bank, NJ
  • DAVIS STANDARD 3.5″ SINGLE STAGE

    DAVIS STANDARD 3.5″ SINGLE STAGE 12028

    • Manufacturer: Davis-Standard

    Davis Standard 3.5″ chrome plated single stage extruder screw. Approximately 24:1 L/D. Four rows of mixing pins.

    Elk Grove Village, IL
  • TWO STAGE 4.5″ CHROME PLATED

    TWO STAGE 4.5″ CHROME PLATED 12019

      4.5″ chrome plated two stage extruder screw with mixing pins at the end of first stage. Approximately 28:1 L/D single key shaft. Unknown manufacturer.

      Elk Grove Village, IL
    • UNK MFG 5″ SINGLE SCREW

      UNK MFG 5″ SINGLE SCREW 12404

        Unk Mfg. 5″ single screw extruder barrel, non-vented, 24:1 L/D, 8 bolt flange mount to gearbox. Threaded front of barrel to accept screen changer. Overall length is 134.5″ with 4.25″ end extension.

        Elk Grove Village, IL
      • Trusted Seller
        Steer Engineering Omicron 12P

        Steer Engineering Omicron 12P

        • Manufacturer: Steer Engineering

        Used Steer Engineering pharmaceutical grade stainless steel co-rotating twin screw extruder. Screw diameter is 12mm. Diameter ratio (DO/DI) is 1.45. Flight Depth is 1.9. Maximum screw speed is 900 RPM. Maximum de...

        Red Bank, NJ
      • Trusted Seller
        Werner & Pfleiderer ZDS-K28

        Werner & Pfleiderer ZDS-K28

        • Manufacturer: WP

        Used Werner Pfleiderer Twin Screw Extruder. Model ZDS-K28, Serial number 513991, Fab. no. 163805, built 1978. Co-rotating Screws, side by side. 28 mm screws. Screw length: 31" long(787.4mm) center of feed throat ...

        Red Bank, NJ
      • COPERIAN ZSK-40 40MM TWIN SCREW

        COPERIAN ZSK-40 40MM TWIN SCREW 18943

          Used 40mm Coperion Type ZSK-40-Mega co-rotating twin screw extruder. S/N 07-3059. New in 2008. No barrels or screws included. Driven by 200 HP 1790 RPM A/C motor with Powerflight VFD controller. Has 1.155 gear ra...

          Elk Grove Village, IL
        3334353637

        Overview

        Extruders are machines used in the manufacturing process to shape materials by forcing them through a die. Commonly used in plastic and metal industries, extruders are essential for creating products like pipes, sheets, and profiles. Their versatility allows them to handle various materials, including polymers, rubber, and even food products.

        FAQ

        What should I consider when buying a used extruder?

        Evaluate the extruder's condition, age, and previous usage. Check for signs of wear, especially on the screw and barrel, and ensure the machine has been well-maintained.

        How do I ensure the extruder is shipped safely to my location?

        Hire a logistics company experienced in transporting heavy machinery. Make sure the extruder is properly secured, and all parts are protected from damage during transit.

        What is the maintenance schedule for an extruder?

        Regular maintenance includes inspecting the screw and barrel for wear, checking and replacing filters, and ensuring the cooling and heating systems are functioning properly. Follow the manufacturer’s guidelines for specific maintenance intervals.