Building Filters

Used Failing Construction

FAILING CF15 #5944
- Model: CF15
- Horsepower: 170 hp
- Drilling depth: 450 m
Manufactured 1973, 5 x 6 mud pump, 8” rotary table, 2-3/8” kelly, mounted on 1966 Kaiser Military 5 x 5 10-wheel truck with 6 cyl diesel engine, 200’ of 2-3/8” drill pipe, truck in fair condition Price: $49,000
$49,000 USD
Get financing
Est. $922/mo
Oceanside, NY
FAILING 1250 #3873R
- Model: 1250
- Horsepower: 370 hp
- Transmission type: Manual
Manufactured 1980, mounted on 1980 International truck with DT466 engine, 5 x 6 Gardner Denver mud pump, no air compressor, 5-1/4” retractable rotary table, 3-1/2 X 24’ kelly, chain pulldown, 2” swivel, new fuel ...
$49,500 USD
Get financing
Est. $932/mo
Oceanside, NY
FAILING CFD-1 #1957N
- Manufacturer: Failing
- Model: CFD1
5 x 6 Wheatley mud pump, Gardner Denver developmental air, hydraulic pulldown, mechanical clutches, stabilizer, mud pan, 3-1/2" kelly, stationary table, mounted on Ford Louisville tandem axle truck with 290 Cummi...
$50,000 USD
Get financing
Est. $941/mo
Oceanside, NY
1966 FAILING 1500 #7797N
- Manufacturer: Failing
- Model: 1500
- Transmission type: Mechanical
- Mast Height: 0.94 m
Manufactured 1966, 5-1/2 x 8 mud pump, mounted on 1972 Brockway 10 wheeler truck with 781 Detroit diesel, PTO, 23’ kelly, 8-1/2” rotary table, breakout table, mechanical pulldown, mechanical clutches, hydraulic q...
$64,000 USD
Get financing
Est. $1,204/mo
Oceanside, NY
1989 FAILING 1500 #3881NA
- Manufacturer: Failing
- Model: 1500
- Transmission type: Mechanical
- Mast Height: 0.94 m
Manufactured 1989, PTO, mounted on 1981 International with Cummins engine, 4x3 centrifugal mud pump, 900 CFM air compressor, hydraulic pulldown, mechanical clutches, 4-1/2" retractable table, 3-1/4" x 25' Kelly, ...
$115,000 USD
Get financing
Est. $2,164/mo
Oceanside, NY
1978 FAILING 1250 #1734N
- Manufacturer: Failing
- Model: 1250
- Horsepower: 370 hp
- Transmission type: Manual
Manufactured 1978, PTO, mounted on Ford with diesel engine, 5 x 6 mud pump, 500/200 on board air compressor, 6” retractable table, chain pulldown, mechanical clutches, breakout wrench, 1 front & 2 rear hydraulic ...
$57,500 USD
Get financing
Est. $1,082/mo
Oceanside, NY
FAILING CF15 #557Ta
- Model: CF15
- Horsepower: 170 hp
- Drilling depth: 450 m
2006, trailer mounted, Gardner Denver 5-1/2 x 8 mud pump, 39’ x 45,000# tubular steel mast, low hours, located Texas Price: $190,000
$190,000 USD
Get financing
Est. $3,576/mo
Oceanside, NY
FAILING CFD-2 #3011R
- Manufacturer: Failing
- Model: CFD2
Mounted on 1996 Ford F series 2 wheel drive with 5.9 Cummins diesel engine, 5-1/4" stationary table, 2 3/8" x 15' Kelly, 5x6 GD mud pump, chain pulldown, mechanical clutches, breakout wrench, rod rack, 255' of 15...
$52,500 USD
Get financing
Est. $988/mo
Oceanside, NY
1982 FAILING 1250 #1735N
- Manufacturer: Failing
- Model: 1250
- Horsepower: 370 hp
- Transmission type: Manual
Manufactured 1982, PTO, mounted on International with diesel engine, 5 x 6 mud pump, 250/200 on board air compressor, retractable table, chain pulldown, air clutches, breakout wrench, 1 front & 2 rear hydraulic l...
$46,500 USD
Get financing
Est. $875/mo
Oceanside, NY
FAILING CF15 #8369N
- Manufacturer: Failing
- Model: CF15
- Horsepower: 170 hp
- Drilling depth: 450 m
Manufactured 1974, LeRoi 50S2 air compressor, 5 x 6 mud pump, 5-1/4" retractable table, 3-3/8" fluted kelly, 3 hydraulic leveling jacks, pulldown, mechanical clutches, breakout wrench, mounted on 1974 Internation...
$100,500 USD
Get financing
Est. $1,891/mo
Oceanside, NY
1972 FAILING 1250 #10385Na
- Manufacturer: Failing
- Model: 1250
- Horsepower: 370 hp
- Transmission type: Manual
Manufactured 1972, 5 x 6 mud pump, 50S1 LeRoi air compressor, pulldown, mechanical clutches, mounted on International tandem axle truck with gas engine, 40,000# mast, 15,000# drawworks, 3 drum bailer, single line...
$87,500 USD
Get financing
Est. $1,647/mo
Oceanside, NY
FAILING 1500 DRILL RIG #2826T
- Model: 1500
- Transmission type: Mechanical
- Mast Height: 0.94 m
FAILING 1500 DRILL RIG
Oceanside, NY
1964 FAILING 1500 HOLEMASTER #8617R
- Manufacturer: Failing
- Model: 1500
- Transmission type: Mechanical
- Mast Height: 0.94 m
Manufactured 1964, 5 x 6 mud pump, 2-3/8” kelly bar, 6" rotary table, heavy duty mast, 2 winches w/15” clutch, hydraulic pulldown, mounted on 1964 International truck, PTO, double plated frame, 304 International ...
$62,500 USD
Get financing
Est. $1,176/mo
Oceanside, NY
2002 FAILING F9 #14445T
- Manufacturer: Failing
Manufactured 2002, Deutz deck engine, mounted on Interantional truck with diesel engine, Cummins deck engine, angle capable, in/out and side to side slide base, water tank, Moyno pump, no auto hammer, cathead, no...
$97,500 USD
Get financing
Est. $1,835/mo
Oceanside, NY
FAILING 1500 AND MAYHEW 500 #2827R
- Manufacturer: Failing
- Model: 1500
- Transmission type: Mechanical
- Mast Height: 0.94 m
Short derrick (runs 10’ drill pipe), 1500 retractable table, 2-3/8” kelly, mechanical clutches, 5 x 6 Gardner Denver mud pumps, mounted on 1978 I6000 truck, Cat diesel engine, rig has been sitting over 9 years an...
$43,500 USD
Get financing
Est. $819/mo
Oceanside, NY
Failing 1000 Drilling Rig
- Manufacturer: Failing
- Model: 1000
Good condition Failing 1000 Drilling Rigs. Located in USA and other countries. Click request price for more information.
USA