FAILING 750 HOLEMASTER #894T
- Manufacturer: Failing
- Model: 750
4-1/2 x 6 Gardner Denver piston mud pump, no air, 2-7/8" x 18' kelly (runs 10' x 2-708" rods), mounted on 2000 International 4700 w/DT466 engine, no drill rod, Mayhew Junior thread on kelly, all new hydraulic con...
FAILING 1250 DRILL RIG #10724T
- Manufacturer: Failing
- Model: 1250
- Horsepower: 370 hp
- Transmission type: Manual
Manufactured mid 1970’s mounted on 1995 Mack truck with Mack diesel engine, PTO, Failing 5 x 6 mud pump, Leroi 256S2 air compressor, 5-1/4” retractable table, 2-3/8” x 23’ fluted kelly, mechanical clutches, pulld...
Oceanside, NY1990 #FAILING F6 11968Na
- Manufacturer: Failing
- Model: F6
Manufactured 1990, core and auger drill, mounted on 1990 International 4900 with DT466 diesel engine, 2 winches, Moyno 3L8 pump, electric over hydraulic controls, Cummins 4BT deck engine, deck mounted 2000psi ste...
FAILING 1500 DRILL RIG #7544Tb
- Model: 1500
- Transmission type: Mechanical
- Mast Height: 0.94 m
Mounted on 1964 Chevy truck, 471 Detroit diesel, 7-1/2” x 8 GD FXX172 mud pump, 42’ derrick (2-sections), hydraulic pulldown, 30” stroke, hydraulic table, stored inside a barge for 7 years Price: $87,500
1988 FAILING 1250 HOLEMASTER #796T
- Manufacturer: Failing
- Model: 1250
- Horsepower: 370 hp
- Transmission type: Manual
Manufactured 1988, 5 x 6 Failing mud pump, (extra 5 x 6 pump included), 85 cfm Atlas Copco air compressor (can be remounted as an auxiliary compressor), 2” diaphragm mud pump, 7-1/2” retractable table, capable of...
FAILING 2000 DRILL RIG #7544Ta
- Manufacturer: Failing
Mounted on tandem axle trailer, triple drum drawworks, (2) Detroit 471 engines, 58’ derrick, chain pulldown, 5-1/2 x 8 Gardner Denver mud pump, 18” table, travelling block, leveling jacks, stored inside since 201...
FAILING CFD1 DRILL RIG #3564Ta
- Manufacturer: Failing
- Model: CFD1
Mounted on truck which is bad, 5 x 6 Failing mud pump, retractable table, Leroi developmental air compressor, 30’ mast, 2-3/8” kelly, chain pulldown, mechanical clutches, PTO, 2 rear hydraulic leveling jacks, own...
FAILING CF15 DRILLING RIG #10834T
- Manufacturer: Failing
- Model: CF15
- Horsepower: 170 hp
- Drilling depth: 450 m
Gardner Denver 4 x 5 mud pump and Gardner Denver 5 x 6 mud pump, 667 Gardner Denver rotary air compressor, Detroit 6V53 diesel engine on deck, 47’ mast, 24’ kelly (extra 24’ kelly included), mounted on tandem axl...
Oceanside, NY1979 FAILING CF2500 DRILL RIG #1271T
- Manufacturer: Failing
Manufactured 1979, Double drum drawworks (winch and kelly drum) with good wire rope, new gear box to replace old PTO chain case, 58’ derrick, racking board, small winch for handling tools, mounted on 4 axle Henri...
FAILING 1500 DMX DRILL RIG #9268Ta
- Manufacturer: Failing
- Model: 1500DMX
- Transmission type: Mechanical
- Mast Height: 0.94 m
Mounted on 1986 International truck with DT466 diesel engine (low hours after rebuild), PTO, non-retractable rotary table with 2 pins to handle 6” casing, (2) 5x6 mud pumps (clutch needs work, 4-1/2” x 20’ kelly,...
1980 FAILING 1250 HOLEMASTER DRILL RIG #1531T
- Model: 1250
- Horsepower: 370 hp
- Transmission type: Manual
Manufactured 1980’S, freshly rebuilt 5 x 6 mud pump, no air compressor, retractable table, 3” hex kelly pulldown, 23’ kelly, 33’ derrick, mechanical clutches, mounted ON 2010 Peterbilt truck with Paccar diesel en...
- Trusted Seller
Failing 2500
- Manufacturer: Failing
- Model: 2500
Filing 2500 Cat 3306 power pack Retractable table 30 ton pullback complete with pipe trailer
Failing Holemaster RC3000
- Manufacturer: Failing
- Model: RC3000
- Hours: 1,500 h
Drilling rig refurbished 2012 Approx 1500 hours since refurb Capable of drilling up to 1100m at 88mm Max Pullback - 30T Trailer Mounted Cat 3306b Drill Rig Engine 16m mast height 10.5m mast to rotary table Retrac...
Middlesbrough, United KingdomFAILING 2500 Drill Rig
- Manufacturer: Failing
- Model: 2500
FULLY REFURBISHED FAILING 2500 RETRACTABLE TABLE CAT 3306 ENGINE 30 TON PULLBACK SOLD COMPLETE WITH PIPE TRAILER IN EXCELLENT CONDITION
Larnaca, Cyprus
Failing Holemaster Drill Rig
- Manufacturer: Failing
- Failing 1500 Holemaster Drill Rig - Shop No. (serial number) 903305 - Table Drive Rotary - Kelly Bar - Draw works - Mounted on a GMC Truck 6x6 (needs to be replaced or repaired) - PTO Drive from Truck gas engin...
Mifflinburg, PA
Failing 250 Drilling Rig
- Manufacturer: Failing
- Model: 250
Good condition Failing 250 Drilling Rigs manufactured in 1985. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
