1990 FAILING F10 #4885Td
- Model: F10
Manufactured 1990, diesel deck engine, mounted on Ford L9000 with diesel engine Price: $77,500
2002 FAILING F9 #14445T
- Manufacturer: Failing
Manufactured 2002, Deutz deck engine, mounted on Interantional truck with diesel engine, Cummins deck engine, angle capable, in/out and side to side slide base, water tank, Moyno pump, no auto hammer, cathead, no...
FAILING 1500 DRILL RIG #1375Tb
- Manufacturer: Failing
- Model: 1500
- Transmission type: Mechanical
- Mast Height: 0.94 m
750/125-250, 7” retractable table, Little Giant swivel, 400’ of 2-7/8 flush joint pipe, mounted on 3 axle Peterbilt, 6V71 Detroit, 10 new tires on truck Price: $75,000
FAILING 1500 AND MAYHEW 500 #2827R
- Manufacturer: Failing
- Model: 1500
- Transmission type: Mechanical
- Mast Height: 0.94 m
Short derrick (runs 10’ drill pipe), 1500 retractable table, 2-3/8” kelly, mechanical clutches, 5 x 6 Gardner Denver mud pumps, mounted on 1978 I6000 truck, Cat diesel engine, rig has been sitting over 9 years an...
1965 FAILING CFD-1B #14819T
- Manufacturer: Failing
- Model: CFD1B
Manufactured 1965, mounted on 1979 International S series 2551 tandem axle truck with DT466 diesel engine, (2) mud pumps: Failing FM45 5 x 6 duplex and Gardner Denver FG FXG 5 x 6 duplex, Ingersoll Rand Type 30 2...
FAILING JED-A REVERSE CIRCULATION RIG #13522T
- Manufacturer: Failing
- Model: JED-A
Mounted on single axle trailer, 45’ mast, 6 part line on kelly, 5 part line on trip drum, New 471 Detroit deck engine, sandline, Murphy controls, 18” hinged flip up Failing rotary table, Wagner hydraulic weight i...
1969 FAILING 1500 DRILL RIG #9268Tb
- Manufacturer: Failing
- Model: 1500
- Transmission type: Mechanical
- Mast Height: 0.94 m
Manufactured 1969, Reworked in 1985, mounted on 1989 International tandem truck with DT466 diesel engine, friction clutches, 40’ mast, double drum, 5 x 6 mud pump, 300’ drill rod Price: $64,500
1964 FAILING CFD2 DRILL RIG #8107T
- Model: CFD2
Built 1964, 4-1/2 x 5 Failing mud pump, Grimmer Schmidt 125cfm developmental air compressor, 5-1/4” stationary table, 2-3/8” kelly, 10' stroke, mounted on 1984 International truck with DT466 engine, PTO), 4 hydra...
#FAILING DMX DRILL RIG 9278T
- Manufacturer: Failing
Mounted on 1988 International Navistar 8300 6x4 truck, Gardner Denver FXX 172 mud pump with 8” stroke fully operational Price: $75,000 GARDNER DENVER 2500 DRILL RIG
1980 FAILING CF15 DRILL RIG #3525Ta
- Manufacturer: Failing
- Model: CF15
- Horsepower: 170 hp
- Drilling depth: 450 m
Manufactured 1980, 5-1/2 x 8” Gardner Denver duplex pump, 23’ kelly, chain pulldown, air clutches, breakout wrench, 5-5/8” retractable rotary table, derrick 34’ from table to crown, mounted on 2005 Kenworth T300,...
1987 FAILING F10 DRILL RIG #10684T
- Manufacturer: Failing
- Model: F10
Auger drilling, high speed rock coring, conventional mud/air rotary drilling. Rig manufactured 1987, mounted on 2015 Mack Truck CXU613 with 13L diesel engine, approx 540,000 miles, Eaton 10 speed manual transmiss...
1979 Failing Holemaster 1250
- Manufacturer: Failing
PLEASE CALL FOR PRICE This refurbished 1979 Failing Holemaster 1250 drill rig mounted on a Ford LT9000 is ready for tough jobs. It boasts a powerful compressor, a recently replaced engine, upgraded drive train, a...
Tulsa, OK
FAILING CFD-1B DRILL RIG #9974T
- Manufacturer: Failing
- Model: CFD1B
7-1/2” rotary table stationary, 5-1/2 x 6 Failing mud pump with new sleeves and pistons, grout pump, mounted on 1993 Ford L8000 Tandem axle truck with diesel engine, PTO, 20’ stabilizer, bits, subs, tools, slidin...
1979 Failing CF 2500 Drill Rig
- Manufacturer: Failing
PLEASE CALL FOR PRICE For sale is a used 1979 Failing CF 2500 Drill Rig, equipped with a recently installed Detroit 8v 92 motor for enhanced performance. This rig features a new PTO gearbox draw works that underw...
Tulsa, OK
1992 Failing 1250 Rotary Drill Rig
- Manufacturer: Failing
- Model: 1250
- Horsepower: 370 hp
- Transmission type: Manual
PLEASE CALL FOR PRICE This Failing 1250 Rotary Drill Rig is a robust and dependable machine, ready for immediate deployment. Mounted on a 1992 Freightliner FLD120 with a powerful Series 60 Detroit engine, this ri...
Tulsa, OK
Failing 750 Drilling Rig
- Manufacturer: Failing
- Model: 750
Good condition Failing 750 Drilling Rigs. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword