Processing » Granulators & Pelletizers

Search By Manufacturer

Search By Country

Building Filters

6820

Used Granulators & Pelletizers

  • Schugi FX-100 Flex-O-Mix w/ Feeder

    Schugi FX-100 Flex-O-Mix w/ Feeder

    • Manufacturer: Schugi
    • Model: FX-100

    Used Schugi Flex-o-Mix agglomerator, model FX-100, stainless steel product contact surfaces, driven by 5 hp, 460 volt motor, Accurate powder feeder with 1.5" diameter feed port, Serial# 9401046-000, Braun & Luebb...

    Cleveland, OH
  • Ross ME100 Emulsifier

    Ross ME100 Emulsifier

    • Manufacturer: Ross

    Used Ross emulsifier, model ME100, stainless steel construction, 2.5" diameter rotor stator design, driven by 1.5 hp, 230/460 volt motor, on stand. Ross ME100 Emulsifier

    Cleveland, OH
  • Collette GRAL75 75 liter Mixer

    Collette GRAL75 75 liter Mixer

    • Manufacturer: Collette
    • Model: Gral-75
    • Noise level: 85 dB

    One used Collette GRAL75 75 liter Mixer, 460/60/3, with blade but NO BOWL, S/N 00GRL00750102 Collette GRAL75 75 liter Mixer

    Cleveland, OH
  • Bowers OPS 40/15 Vacuum Mixewr

    Bowers OPS 40/15 Vacuum Mixewr

      Used 50 gallon Bowers multi shaft vacuum mixer, model OSP 40/15, stainless steel product contact surfaces, vacuum cover, 40 hp disperser, 15 hp sweep blades, 26" diameter x 24" straight side, dish bottom, jackete...

      Cleveland, OH
    • Trusted Seller
      2013 MG Recycling 380VZT Wire

      2013 MG Recycling 380VZT Wire Granulation System

      • Manufacturer: MG Recycling

      MG Recycling 380VZT Wire Granulation System Mfg: 2013 Capable of Processing around 2000 lbs/hr System was fully operational when shut down NOT Under Power- Dismantled by Rigging Company. Stored indoors Hours...

      $110,400 USD

      Get financing

      Est. $2,078/mo

      Maryland, USA
    • Trusted Seller
      2009 Herbold SML 60/100 S7-2

      2009 Herbold SML 60/100 S7-2 Granulator System

      • Manufacturer: Herbold

      The 2009 Herbold SML 60/100 S7-2 Granulator System is a high-capacity, used industrial machine designed to efficiently handle recycling and waste processing tasks. It features a powerful 125 HP engine and a subst...

      $91,800 USD

      Get financing

      Est. $1,728/mo

      Michigan, USA
    • CUMBERLAND 6″ PELLETIZER 17387

      CUMBERLAND 6″ PELLETIZER 17387

      • Manufacturer: Cumberland

      Cumberland Utilizer 6″ strand pelletizer. Machine has a 36 knife helical style rotor and a 5HP 180-Volt DC motor with silicon controlled rectifier control. Mounted on casters, S/N 30500-88004. Manufactured 1988. ...

      Elk Grove Village, IL
    • Trusted Seller
      2005 Arun Enterprises Model 24

      2005 Arun Enterprises Model 24 Test

      • Manufacturer: Arun Enterprises

      This 2005 Arun Enterprises Model 24 Test Granulator is a reliable used machine, perfect for testing product materials. It comes equipped with a 15 HP motor and operates on 380 V, providing efficient granulation c...

      $2,992 USD
      Indiana, USA
    • Trusted Seller
      Conair CGW Granulator (2019)

      Conair CGW Granulator (2019)

      • Manufacturer: Conair
      • Model: CGW-1424

      Model: CGW-1424 | Hp: 40 | Rotor style: 5 Blade | Processing capacity: 14" x 24" Feed Throat | Voltage: 460

      North Carolina, USA
    • Trusted Seller
      Auto Grind Model LSG-817NH Granulator

      Auto Grind Model LSG-817NH Granulator for Plastics 460V 3 Phase

      • Manufacturer: Auto Grind

      “Used in Working Condition” 🔥 TESTED Model LSG-817NH Granulator for Plastics 460V 3 Phase Blades in good condition. X=8" Y=17" Contact for freight quote. INV# P-2036

      $2,200 USD
      Henderson, KY
    • WAB Turbula Mixer

      WAB Turbula Mixer

        Used WAB Turbula mixer, model T2F, .18 kw, 110 volt, serial# 030427, built 2003. WAB Turbula Mixer

        Cleveland, OH
      • Myers 5 h.p. Industrial Disperser/Mixer

        Myers 5 h.p. Industrial Disperser/Mixer

        • Manufacturer: Myers

        Myers model 775A-933, 5 h.p. Industrial Disperser/Mixer, with a 6" mixing blade. Myers 5 h.p. Industrial Disperser/Mixer

        Cleveland, OH
      • Cowles 25 h.p. bow-tie Mixer

        Cowles 25 h.p. bow-tie Mixer

        • Manufacturer: Cowles

        One used 25 hp Cowles bow-tie Mixer, stainless ssteel shaft and blade, hydrauilc lift with on board pump and reservoir, 25 hp, 230/460 volt motor, floor mounted. Cowles 25 h.p. bow-tie Mixer

        Cleveland, OH
      • 5 gallon Ross mixing kettle,

        5 gallon Ross mixing kettle, model VSL-5,

        • Manufacturer: Ross

        Used 5 gallon Ross mixing kettle, model VSL-5, 316 stainless steel construction, approximately 14" diameter x 12" straight side, flat removable top, dish bottom, electrically heated vessel, top mounted .37 kw Lig...

        Cleveland, OH
      • 5 gallon Lee DMT5-HOM Jacketed

        5 gallon Lee DMT5-HOM Jacketed Tank w/ Mixer

          One used Lee Model DMT5-HOM 5 gallon kettle, stainless steel construction, 14" Diameter x 10" Deep, hemispherical bottom, jacketed for PSI@ F, Bridge mounted Eppenbach Triple motion Agitator with double motion ag...

          Cleveland, OH
        • no-image_en.png

          Frewitt GLA-ORV Granulators & Pelletizer

          • Manufacturer: Frewitt
          • Model: GLA-ORV

          Good condition Frewitt GLA-ORV Granulators & Pelletizers. Located in USA and other countries. Click request price for more information.

          USA
        1617181920

        Overview

        Granulators and pelletizers are essential machines in the plastics and recycling industry. They are used to transform waste plastic and other materials into small, uniform granules or pellets that can be easily reprocessed or utilized in manufacturing new products. These machines help in reducing waste, improving material handling, and increasing the efficiency of recycling processes.

        FAQ

        What should I consider when buying a used granulator or pelletizer?

        Consider the machine's age, condition, capacity, and the type of materials it can process. Check for maintenance records and look for signs of wear or damage.

        How do I ensure the granulator or pelletizer is shipped safely to my location?

        Use a reputable transport service that specializes in heavy machinery. Ensure the machine is properly secured and protected during transit to prevent any damage.

        What is the maintenance schedule for a granulator or pelletizer?

        Regular maintenance includes checking and replacing blades or cutting tools, lubricating moving parts, and inspecting the machine for any wear or damage. Consult the manufacturer’s manual for detailed maintenance intervals.