Processing » Granulators & Pelletizers

Search By Manufacturer

Search By Country

Building Filters

6836

Used Granulators & Pelletizers

  • Trusted Seller
    1997 RAPID 1018-K

    1997 RAPID 1018-K

    • Manufacturer: Rapid
    • Model: 1018-K

    Used Rapid granulator Model 1018-K. Has 3 knife, scissors cut, open rotor & 3/8" discharge screen. Includes collection bin for ground material. No blower included. Grinder is driven by a 20 HP motor, 230/460 volt...

    Hainesport, NJ
  • Trusted Seller
    1996 LR SYSTEMS SG400

    1996 LR SYSTEMS SG400

    • Manufacturer: LR SYSTEMS

    Used LR Systems Granulator. Model SG400, Serial #6557, new 1996. Has 16" X 16" throat opening. Driven by an approximately 25 HP motor. Includes motor starter and 5 HP blower for discharge. Also includes oversized...

    Hainesport, NJ
  • FREWITT GRANULATOR MGI 400 SS

    FREWITT GRANULATOR MGI 400 SS ROTOR GRANULATOR #13366

    • Manufacturer: Frewitt

    Frewitt Granulator Model MGI-400, Serial Number 1181280. This unit features stainless steel chamber and rotor, oscillating rotor design, sliding and hinged top cover, 8″ rotor length, bottom discharge shroud tube...

    Jefferson Valley, NY
  • Trusted Seller
    1999 PROCESS CONTROL GTDN50BMXXU

    1999 PROCESS CONTROL GTDN50BMXXU

    • Manufacturer: PROCESS CONTROL

    Used 15" x 27" Process Control Granulator. Model GTDN50BMXXU, serial #90075005, new 1999. Has 3-knife open rotor. Driven by a 50 hp motor but no motor starter included.

    Hainesport, NJ
  • Trusted Seller
    GRANUTEC 3" x 39"

    GRANUTEC 3" x 39"

    • Manufacturer: GRANUTEC

    Used Granutec 3" x 39" Pull Roll Fed Granulator Low profile base Includes approximately 15 hp rotor motor and motorized pull roll feed Blower for discharge but no blower included

    Hainesport, NJ
  • Trusted Seller
    1998 RAPID 2442 RS

    1998 RAPID 2442 RS

    • Manufacturer: Rapid

    Used Rapid Granulator With 24" x 42" Feed Throat Opening Model 2442 RS, Serial #85-859, new 1998 Has a 20 knife rotor with (3) bed knives, dual flywheels Has conveyor infeed hopper with pneumatic tilt back assist...

    Hainesport, NJ
  • Trusted Seller
    CUMBERLAND 15x24

    CUMBERLAND 15x24

    • Manufacturer: Cumberland

    Used Cumberland Model 15x24 granulator. Unit has a 15" x 24 " feed throat with hopper. Unit has a bed cutting chamber, the rotor is an open 3-blade with the 2 bed knives and 3 rotor knives driven by 50HP, 1475rpm...

    Hainesport, NJ
  • Trusted Seller
    CUMBERLAND 1837

    CUMBERLAND 1837

    • Manufacturer: Cumberland

    Used Cumberland Model 1837 granulator. Has 18" X 37" feed throat, 5 knife steep angle step adjustable rotor knives (10 segments), each knife being Approx. 18.5" wide, 2 bed knife. Belt driven by a 100 HP 460 volt...

    Hainesport, NJ
  • Trusted Seller
    ANDRITZ SPROUT BAUER DSF1518

    ANDRITZ SPROUT BAUER DSF1518

    • Manufacturer: Andritz
    • Model: DSF1518

    Used Andritz Sprout-Bauer Model DSF1518 granulator, S/N 2000-00373, 7-knife rotor, 2 bed knife, 30 HP 460 volt only motor, belt drive, 5" X 18" blow-in in-feed hopper, vacuum take-off discharge, mounted on a shor...

    Hainesport, NJ
  • PP 35 Pellet Press

    PP 35 Pellet Press

      Solid, high-quality pellets are an important precondition for reliable and meaningful XRF analysis. With the PP 35, RETSCH offers a pellet press which produces strong pellets with a smooth surface. The PP 35 feat...

      Clifton, NJ
    • Trusted Seller
      Glatt GS100

      Glatt GS100

      • Manufacturer: Glatt
      • Model: GS100

      Used Glatt type GS100 stainless steel granulator/screen. Unit has 0.75kw motor with belt drive. Has (2) cone screens. Unit is mounted on mobile base. Click on the link below to see a video of the machine running.

      Hainesport, NJ
    • Trusted Seller
      Cumberland 37"

      Cumberland 37"

      • Manufacturer: Cumberland
      • Model: 37

      Used Cumberland pull roll hopper with 6" diameter x 37" wide Knurald and grooved all set position feed roll infeed with pneumatic pinch. Feed roll in feed trumpet, feed rolls are chain and sprocket driven by 7.5 ...

      Hainesport, NJ
    • Trusted Seller
      GLATT GRS-100

      GLATT GRS-100

      • Manufacturer: Glatt

      Used Glatt type GRS-100 stainless steel granulator/screen. Screen size 100mm diameter X 100mm long. Hinged stainless steel feed Cone. Manual raise/lower. Driven by a 1.1 kW electric motor through a variable speed...

      Hainesport, NJ
    • Trusted Seller
      VECOPLAN 200

      VECOPLAN 200

      • Manufacturer: Vecoplan

      New approximately 200, 60mm rotating cutter blades for Vecoplan grinder.

      Hainesport, NJ
    • Trusted Seller
      POWEREX CORPORTATION FM-VG-10

      POWEREX CORPORTATION FM-VG-10

      • Manufacturer: POWEREX CORPORTATION

      Used 10 Liter Powerex Corporation FM-VG-10 Stainless Steel Vertical Granulator Manufacturer: Powerer Corportation Model: FM-VG-10 Mounted on stainless steel base with controls, portable on wheels

      Hainesport, NJ
    • no-image_en.png

      Niro Fielder PMA Granulators & Pelletizer

      • Manufacturer: Niro Fielder
      • Model: PMA

      Good condition Niro Fielder PMA Granulators & Pelletizers. Located in United Kingdom and other countries. Click request price for more information.

      United Kingdom
    4647484950

    Overview

    Granulators and pelletizers are essential machines in the plastics and recycling industry. They are used to transform waste plastic and other materials into small, uniform granules or pellets that can be easily reprocessed or utilized in manufacturing new products. These machines help in reducing waste, improving material handling, and increasing the efficiency of recycling processes.

    FAQ

    What should I consider when buying a used granulator or pelletizer?

    Consider the machine's age, condition, capacity, and the type of materials it can process. Check for maintenance records and look for signs of wear or damage.

    How do I ensure the granulator or pelletizer is shipped safely to my location?

    Use a reputable transport service that specializes in heavy machinery. Ensure the machine is properly secured and protected during transit to prevent any damage.

    What is the maintenance schedule for a granulator or pelletizer?

    Regular maintenance includes checking and replacing blades or cutting tools, lubricating moving parts, and inspecting the machine for any wear or damage. Consult the manufacturer’s manual for detailed maintenance intervals.