Processing » Industrial Furnaces & Ovens

Search By Manufacturer

Search By Country

Building Filters

5144

Used Industrial Furnaces & Ovens

  • DESPATCH

    DESPATCH

    • Manufacturer: Despatch

    DOUBLE DOOR OPENING WITH PRESSURE LATCHES AND ROOF MOUNTED REMOVABLE HEATING ELEMENT CHAMBER WITH CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH THE ROOF CREATIN...

    Tolland, CT
  • DESPATCH RS-3

    DESPATCH RS-3

    • Manufacturer: Despatch
    • Model: RS-3

    DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEATING ELEMENTS ARE MOUNTED IN A PROTECTED AREA BEHIND WORK CHAMBER. HEATED AIR IS CIRCULATED VERTICALLY.

    Tolland, CT
  • DESPATCH V35STD

    DESPATCH V35STD

    • Manufacturer: Despatch
    • Model: V35STD

    DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEATING ELEMENTS AND CIRCULATING FAN ARE MOUNTED BELOW THE WORK CHAMBER IN A PROTECTED AREA. HEATED AIR IS CIRCULATED HORIZONTALLY.

    Tolland, CT
  • GRIEVE AB-650

    GRIEVE AB-650

    • Manufacturer: Grieve
    • Model: AB-650

    SINGLE SIDE SWING DOOR WITH PRESSURE TYPE LATCHES. HEATING ELEMENTS ARE MOUNTED IN BOTH SIDE WALLS AND ARE PROTECTED BY AN INTERIOR SHROUD. A DIRECT DRIVE CIRCULATING FAN MOUNTED IN THE REAR WALL CIRCULATES THE H...

    Tolland, CT
  • Trusted Seller
    MRL 200mm

    MRL 200mm

    • Manufacturer: MRL

    MRL 200mm Clamshell Diffusion Furnace 3 zone

    Billerica, MA
  • Trusted Seller
    CG TEMPRESS WITH 808 CONTROLLERS

    CG TEMPRESS WITH 808 CONTROLLERS

    • Manufacturer: Tempress

    3 stack furnace w/eurotherm 808 controllers

    Billerica, MA
  • Trusted Seller
    Thermtec

    Thermtec

    • Manufacturer: Thermtech

    THERMTEC/MRL BLACK MAX SINGLE TUBE FURNACE EUROTHERM DIGITAL TEMPERATURE CONTROLLERS 1200 DEGREES C, 6″ VESTIBULE BORE (SUITABLE FOR 4″ WAFERS)

    Billerica, MA
  • Trusted Seller
    THERMTEC/MRL BLACK MAX MODEL 618

    THERMTEC/MRL BLACK MAX MODEL 618

    • Manufacturer: Thermatec

    SINGLE TUBE FURNACE 6″ BORE 3 ZONE 3 DIGTITAL CONTROLLERS (2) IN STOCK

    Billerica, MA
  • Trusted Seller
    THERMCO 4300DDC 4 STACK

    THERMCO 4300DDC 4 STACK

    • Manufacturer: Thermco Systems

    4A THERMCO 4300DDC 4 STACK FURNACE FOR 4″ WAFERS, APPROX 6′ LONG, 3 ZONE MICROPROCESSOR CONTROLLED WITH RAMP/SOAK (2) LPCVD TUBES, (2) STANDARD DIFFUSION TUBES 480V, 110A 92 KW

    Billerica, MA
  • Trusted Seller
    SST 1200

    SST 1200

    • Manufacturer: SST SCIENTIFIC SEALING TECHNOLOGY

    Table Top Reflow Furnace Vacuum Purge, Gas Pressure SST 1200 Front View Table Top Air Cooled Water Chiller Facilities For SST 1200 110V 26 AMPS Water Cooled N2 Backfill 2 Gas Inputs (If Needed)

    Billerica, MA
  • Trusted Seller
    SST MV 2200

    SST MV 2200

    • Manufacturer: SST SCIENTIFIC SEALING TECHNOLOGY

    JMI MV 2200 GOLD/TIN REFLOW SYSTEM (NEW) STAINLESS STEEL EXTERIOR MV 2200 (SMALL FOOT PRINT VERSION….21X34X46” TALL) SYSTEM VACUUM TESTED TO 50 MTORR OR BETTER ALL THE OLD ELECTRONICS REMOVED 550 DEG C MAX, ACCEP...

    Billerica, MA
  • Trusted Seller
    SST DAP SEALER MODEL 700

    SST DAP SEALER MODEL 700

    • Manufacturer: SST SCIENTIFIC SEALING TECHNOLOGY

    w/1800 mproc temperature controller cvc autovalve controller

    Billerica, MA
  • Trusted Seller
    RTC S910 Belt Furance

    RTC S910 Belt Furance

    • Manufacturer: RTC

    9 ZONE, NITROGEN APPROXIMATELY 15′ LONG, 24″ WIDE, 10″ BELT 999 DEGREES C, FAST FIRE HEATING (INFRARED)

    Billerica, MA
  • Trusted Seller
    A.G. Associates 410

    A.G. Associates 410

    • Manufacturer: A.G. Associates

    Table top rapid thermal annealer for up to 4″ (100mm) wafers.

    Billerica, MA
  • ToAuto Melting Furnace

    ToAuto Melting Furnace

      -Shipping dimensions: length 11" x width 15" x height 17" -Model: SG-RRL-V1.2 -KW: 1400W

      $180 USD
      Brant, Canada
    • no-image_en.png

      Sacmi KMS 2550/92.3 Industrial Furnaces & Oven

      • Manufacturer: Sacmi
      • Model: KMS 2550/92.3

      Good condition Sacmi KMS 2550/92.3 Industrial Furnaces & Ovens. Located in Italy and other countries. Click request price for more information.

      Italy
    3940414243

    Overview

    Industrial furnaces and ovens are essential for various manufacturing processes, including metalworking, ceramics, and chemical production. These high-temperature units are designed for tasks such as heat treating, drying, and curing materials. They come in various sizes and configurations to meet specific industrial needs, offering precise temperature control and efficiency.

    FAQ

    What should I consider when buying an industrial furnace or oven?

    Consider the temperature range, fuel type, size, and capacity requirements, as well as any specific features needed for your application. Checking the unit's energy efficiency and control systems is also crucial.

    How do I ensure the industrial furnace or oven is shipped safely to my location?

    Use a reputable transport service experienced in handling heavy industrial equipment. Ensure the unit is securely packed and that all components are well-protected against damage during transit.

    What is the maintenance schedule for an industrial furnace or oven?

    Regular maintenance includes inspecting and cleaning heating elements, checking temperature controls, and ensuring proper ventilation. Refer to the manufacturer's manual for specific maintenance tasks and intervals.